Metal Ground Sockets - Standard Sizes
type:
1. Pop-up grounding socket: The grounding plug is easy to open using the figure-eight dial. The overall curved panel is very beautiful, and the front and rear screws of the upper cover are more securely fixed.
2. Open-circuit grounded socket: The plug can be inserted together with the socket to cover the upper cover, leaving only the plug wire, which is convenient for passage and cleaning. Side-plugged products are more suitable for strong and weak current installations, which can meet the different needs of customers and are especially suitable for engineering projects. use.
3. Spiral ground socket: A truly waterproof ground socket, it is the best choice for installing weak current modules. It is very convenient to open. It has horizontal fine-tuning and heightening devices. The copper cover on the surface cannot be installed because it is skewed or the bottom box is embedded too deep.
4. Sliding ground socket: push the button down gently, and the upper cover will automatically push forward and pop open. When in use, since the upper cover is open, the feet cannot be mixed, eliminating the risk of accidents. It adopts U series functional parts and is equipped with four-position three-plug Multifunctional, it can also install a six-position computer module. The weak current end at the bottom can be shielded with a stainless steel cover. It is especially ideal for installing strong current and weak current together.
5. Hidden ground socket: It can be opened and closed by gently pressing the small cover in the middle. It is very convenient to use. The thickness is only 1.5mm and can be close to the desktop. The screws on both sides are removable and the support of the functional parts can be removed, which is very convenient for the functional parts. support and replacement.
Purpose of grounded socket:
1. When leakage occurs when the phase wire inside the electrical equipment is connected to the outer casing, leakage current will flow through the ground wire, and the line protection device (leakage switch and miniature circuit breaker) will perform tripping protection.
2. Ensure that the potential of the shell of the electrical equipment is 0. Even if there is a leakage, it will not cause an electric shock to the human body.
1: Advantages
1. Easy to use: For example, in the living room, an electric tea tray is installed next to the coffee table, which is easy to use and makes tea more convenient; if a floor plug is installed in the restaurant, there is no need to pull a long plug wire to eat hot pot. The ground plug comes in handy immediately, so you don`t have to worry about messy wiring tripping.
2. Easy installation: The ground plug can adapt to different construction environments, different structures, and floor requirements of different thicknesses, and the pipe grooves are also easy to connect; they can be coordinated with the appearance of the ground.
3. Wear-resistant and corrosion-resistant: The place where the grounding plug is used determines that the material it is produced is more wear-resistant and corrosion-resistant than ordinary switch sockets, and it is also waterproof
Installation method: 1. Installation of the bottom box: First, determine the installation location. For ground plug installation, choose a relatively dry space location, connect the bottom box to the metal wire conduit, and pour concrete to fix the bottom box. Second, determine the embedding depth. Generally speaking, in order to ensure that the uppshould er cover can fit perfectly with the ground, the upper end of the bottom box be 3-5 mm lower than the ground, so that it will not protrude too much and cause potential danger, nor will it sink inward and cause Inconvenient to use.
. Installation of the upper cover: After the concrete is poured and fixed, remove the protective cover of the bottom box, clean the dust and debris in the box, and clean the gaps. Secondly, apply anti-corrosion coating around the holes in the ground. The concrete material around the holes must be completely dry before installation. Since the ground plug is installed on the ground and is in direct contact with the tiles on the ground, if anti-corrosion treatment is not carried out, the incompletely dried concrete material will cause efflorescence when it comes into contact with the metal, corroding the ground plug cover. After anti-corrosion treatment, connect the ground wire between the bottom box and the upper cover and fix the upper cover.